Service Manual

CHASSIS

3-21Toro GrandStand Service Manual

3. Install grease seal into the wheel hub (Fig. 0075). 6. Position the caster axle through the bearing and seal

assembly (Fig. 0077).

Fig. 0075 DSCN-0393a

4. Repeat steps 1, 2, and 3 on the other side of the

caster wheel.

5. Fill the center of the wheel hub with high tempera-

ture grease (Fig. 0076).

Fig. 0076 DSCN-0406a

Fig. 0077 DSCN-0398a

7. Install a spacer nut onto both ends of the caster axle

(Fig. 0078).

Note: There should be approximately 3 internal

spacer nut threads visible on both sides,

indicating the axle is centered.

Fig. 0078 DSCN-0379a