Service Manual

CHASSIS
3-16 Toro GrandStand Service Manual
3
15. Remove the boards supporting the deck (Fig. 0058).
Fig. 0058 IMG-1373a
16. Place the HOC pin into the 3” (7.62cm) HOC
position, then verify that the blade tips are also at
3” (7.62cm).
Note: Use the dampener assembly bolt (2009 uses a
nut) to adjust as needed (Fig. 0059).
Fig. 0059 DSCN-0272a
14. 2010 only: Secure the lower end of the lift bar to
the rear cross shaft assembly using the dampener
assembly and nut. Thread the dampener assembly
bolt into the nut until there are 3 threads protruding
(Fig. 0057).
Fig. 0057 DSCN-0793a
13. 2009 only: Secure the lower end of the lift bar to
the rear cross shaft assembly using a nut. Thread
the nut onto the bolt until there are 3 threads
protruding (Fig. 0056).
Fig. 0056 DSCN-0274a