Service Manual

HYDRAULIC DRIVE SYSTEM

6-51Toro GrandStand Service Manual

8. Serial range 290000210 - 290999999: Slide the

right hand roller onto the rear end of the right hand

shifter link rod. Slide the rear end of the shifter link

rod (with roller) through the control fork assembly

following the Allen wrench through to capture the

center roller on the shifter link rod (Fig. 1088).

Fig. 1088 IMG-9499

9. Serial range 290000210 - 290999999: Slide the

left hand roller onto the rear end of the right hand

shifter link rod and into the outside of the control fork

assembly (Fig. 1089).

Fig. 1089 IMG-9431a

11. Slide a washer onto the rear end of the shifter link

rod. Install a hairpin cotter to secure (Fig. 1091).

Fig. 1091 IMG-9424a

10. 2010 only: Slide 3 rollers onto the rear end of the

left hand shifter link. Slide the rear end of the shifter

link (with three rollers) into the control fork assembly

(Fig. 1090).

Fig. 1090 IMG-0948a