Service Manual

HYDRAULIC DRIVE SYSTEM

6-24 Toro GrandStand Service Manual

8. Serial range 290000210 - 290999999: Slide the

right hand roller onto the rear end of the left hand

shifter link rod. Slide the rear end of the shifter link

rod (with roller) through the control fork assembly

following the Allen wrench through to capture the

center roller on the shifter link rod (Fig. 0989).

Fig. 0989 IMG-9407a

9. Serial range 290000210 - 290999999: Slide the left

hand roller onto the rear end of the left hand shifter

link rod and into the outside of the control fork as-

sembly (Fig. 0990).

Fig. 0990 IMG-9410

6. Serial range 290000210 - 290999999: Push down

on the control fork assembly and slide the center

roller into the slot of the pump control arm (Fig.

0987).

Fig. 0987 IMG-9400

7. Serial range 290000210 - 290999999: Using an

Allen wrench as a pilot, locate the center roller and

slide the Allen wrench through it (Fig. 0988).

Fig. 0988 IMG-9405