Service Manual

CONTROLS

4-23Toro GrandStand Service Manual

11. 2010 Only: Remove the LH shifter link and the

3 rollers located on the rear end of the shifter link

inside of the control fork assembly (Fig. 0716).

12. Remove the nut and switch stop arm securing the

control fork assembly (Fig. 0718).

Fig. 0716 IMG-1038a

Shifter Link and Roller Congurations (Fig. 0717):

D. 2009: Serial range 290000001-290000210;

3 rollers, all thin and same size

E. 2009: Serial range 290000211-290999999;

3 rollers, large center roller

F. 2010: Serial range 310000001-310999999;

3 rollers, all large and same size

Fig. 0717 IMG-0941a

Fig. 0718 IMG-1043a

13. Remove the bolt and washer from the shoulder hub

(Fig. 0719).

Fig. 0719 IMG-1044a