Service Manual

CHASSIS

3-6 36” & 40” Toro GrandStand Service Manual

10. Install the upper and lower bearing cups into the

pivot tube (Fig. 022).

Fig. 020 DSCN-0377a

9. Secure the caster wheel assembly to the caster fork

using the axle bolt and nut (Fig. 021).

Fig. 021 DSCN-0376a

Fig. 022 DSCN-0410a

Note: A socket can be used as a driver. Take care

not to scar the race surface (Fig. 023).

Fig. 023 DSCN-0413a

8. Position the seal guard onto both sides of the caster

wheel hub (Fig. 020).