Service Manual

MOWER DECK

7-936” & 40” Toro GrandStand Service Manual

3. Remove the spindle shaft and blade from the spindle

housing (Fig. 573).

Fig. 573 DSCN-3179a

4. Withthespindleshaftrmlysecuredinavise,

remove the nut and washer securing the blade to the

spindle shaft (Fig. 574).

Fig. 574 DSCN-3184a

5. Remove the upper and lower bearings from the

spindle housing (Fig. 575).

Fig. 575 DSCN-3185a

6. Remove the bearing spacer from the spindle

housing (Fig. 576).

Note: Inspect all spindle assembly components.

Replace any that are damaged or worn.

Fig. 576 DSCN-3191a