Service Manual

MOWER DECK
7-536” & 40” Toro GrandStand Service Manual
7
Spindle Assembly Replacement
Spindle Assembly Removal
1. Turn the ignition off and remove the key.
2. Remove the belt cover.
3. Remove the extension spring from the anchor post
(Fig. 559).
5. Raise the machine so the underside of the deck can
be accessed.
6. Blockthemowerdeckbladeandremovetheblade
bolt,washer,andbladefromthespindle(Fig.561).
Fig. 559 DSCN-3121a
4. Remove the belt from the mower deck pulleys (Fig.
560).
Fig. 560 DSCN-3124a
Fig. 561 DSCN-3147a
7. Remove the six nuts securing the thread forming
screws (Fig. 562).
Fig. 562 DSCN-3152a