Service Manual

HYDRAULIC DRIVE SYSTEM

6-22 36” & 40” Toro GrandStand Service Manual

5. Install the woodruff key into the wheel motor shaft

keyway (Fig. 500).

7. Secure the wheel hub onto the wheel motor shaft

using the wheel motor nut (Fig. 502).

Note: The wheel motor nut will be torqued in a later

step.

Fig. 500 DSCN-2827a

6. Apply thread-locking material to the threads of the

wheel motor nut (Fig. 501).

Fig. 501 DSCN-2871a

Fig. 502 DSCN-2806a

8. Securethetiretothewheelmotorhubusingthefour

wheel lug nuts (Fig. 503).

Note: The four wheel lug nuts will be torqued in a

later step.

Fig. 503 DSCN-2805a