Service Manual

ELECTRICAL

8-34 36” & 40” Toro GrandStand Service Manual

Solenoid Installation

7. Remove the two thread forming screws securing the

solenoid the engine base plate (Fig. 829).

1. Secure the solenoid to the engine base using two

thread forming screws (Fig. 830).

Fig. 829 DSCN-2280a

Fig. 830 DSCN-2280a

2. Install the blue and green wires to the two small

studs on the solenoid using the wire’s bullet con-

nectors (Fig. 831).

Fig. 831 DSCN-2278a