Service Manual

CONTROLS
4-42 36” & 40” Toro GrandStand Service Manual
4
Speed Control Adjustment
1. Loosentheclampassemblysecuringthespeed
controlassemblytothespeedcontrolcable(Fig.
336).
Fig. 336 DSC-0534a
2. Movethespeedcontrollevertothe“Fast”position
(Fig.337).
Fig. 337 DSC-0539a
5. Checkforpropertracking
5. Repeatadjustmentuntilthetrackingiscorrect.
7. Checkthatthemachinedoesnotcreepfromneutral
withtheparkbrakesdisengaged.
Important
Do not rotate the linkage too far, as this may cause
the machine to creep in neutral.