Service Manual

CONTROLS
4-2336” & 40” Toro GrandStand Service Manual
4
8. SecurethefrontoftheHOCplatestothecontrol
towerusingthebolt,washer,spacers,andnut.
Tightentherearfastenerassembly.(Fig.263).
9. Secure the HOC handle latch bolt to the control
towerusingthetwonuts(Fig.265).
Fig. 263 DSCN-3902a
Note: The HOC handle must be nested in between
the HOC plates (Fig. 264).
Fig. 264 DSCN-3908a
Fig. 265 DSCN-3912a
10. Installthewasherandsnapringthatsecurethe
HOChandletotheframe(Fig.266).
Fig. 266 DSCN-3843a