Service Manual

CONTROLS

4-12 36” & 40” Toro GrandStand Service Manual

Motion Control Cable Replacement

Motion Control Cable Removal

1. Removetheshoulderboltandangenutsecuring

the end of the control cable to the motion control

lever(Fig.223).

4. Removethetwothreadformingscrewsandcable

clampsecuringthelowercabletothecablebracket

(Fig.226).

3. Remove the cable adjustment nut from the cross

bracket(Fig.225).

Fig. 223 DSCN-3671a

2. Removethespringclipfromthecrossbracket(Fig.

224).

Fig. 224 DSCN-3672a

Fig. 225 DSCN-3674a

Fig. 226 DSCN-3679a