Service Manual

ELECTRICAL
8-4336” & 40” Toro GrandStand Service Manual
8
Note: The hour meter must be orientated so it can
be read from the front of the machine (Fig.
861).
1. Install the hour meter in through the control panel.
Ensure that the mounting clips have secured the
switch in the control panel (Fig. 860).
2. Install the wire harness to the back of the hour meter
(Fig. 862).
Fig. 860 DSCN-2333a
Fig. 861 DSCN-2338a
Fig. 862 DSCN-2328a
Hour Meter/Control Module Installation