Service Manual

ELECTRICAL

8-22 36” & 40” Toro GrandStand Service Manual

1. Using a feeler gauge, check the clutch air gap at

each of the three adjustment slots. Set the gap to

.015” (0.381mm). Make sure the gauge is inserted

between the armature and the rotor friction surfaces

(Fig. 784).

Fig. 784 PICT-0554a

2. Install the spring washer (crown toward the bolt

head) and at washer to the clutch bolt (Fig. 785).

Fig. 785 IMG-9630a

Electric (PTO) Clutch Installation

3. Apply thread locking compound to the threads of the

clutch bolt (Fig. 786).

Fig. 786 PICT-8700a

4. Torque the clutch bolt to 55 ft-lbs. (75 Nm) (Fig.

787).

Fig. 787 DSCN-2612a