Service Manual

MOWER DECK

7-10 36” & 40” Toro GrandStand Service Manual

9. Withthebearingspacercenteredinthehousing,ll

the cavity between the spacer and housing with high

temp grease (Fig. 579).

8. Positionthebearingspacerinthespindlehousing

(Fig.578).

Fig. 578 DSCN-3195a

Fig. 579 DSCN-3198a

10. Install the lower bearing into the spindle housing and

add a couple of pumps of high temp grease to the

centerofthebearingspacer.(Fig.580).

Fig. 580 DSCN-3202a

7. Install the upper bearing into the spindle housing

(Fig. 577).

Fig. 577 DSCN-3193a