Service Manual

ENGINE
5-8 36” & 40” Toro GrandStand Service Manual
5
34. Remove the bolt, spring washer, and washer secur-
ing the clutch to the engine crankshaft. (Fig. 368).
37. Remove the key from the engine crankshaft keyway
(Fig. 370).
Fig. 368 DSCN-2589a
35. Remove the clutch from the engine crankshaft.
36. Remove the drive pulley from the engine crankshaft
(Fig. 369).
Fig. 369 DSCN-2594a
Fig. 370 DSCN-2597a
38. Loosen the jam nut securing the position of the oil
drain assembly, then remove the oil drain (Fig. 371).
Fig. 371 DSCN-2602a