Service Manual

CONTROLS
4-28 36” & 40” Toro GrandStand Service Manual
4
Throttle Cable Replacement
Throttle Cable Removal
9. Whileholdingtheenginechokeleverinthe“OPEN”
position,pulltheslackfromthecablejacket,then
securethepositionofthechokecablewiththescrew
andcableclamp(Fig.282).
1. Removetheboltandcableclampsecuringthe
throttlecabletotheenginethrottleplate(Fig.284).
Fig. 282 DSCN-3530a
10. Securethechokeandthrottlecabletotheoildrain
usingacabletie(Fig.283).
Fig. 283 DSCN-3511a
Fig. 284 DSCN-3505a
2. Removethe“Z”bendofthethrottlecablefromthe
enginethrottlearm(Fig.285).
Fig. 285 DSCN-3535a
11. Ensurethechokeisfunctioningcorrectlybymoving
thechokeknobinandoutwhileobservingthechoke
plateinthecarburetorthroat.