Service Manual

CONTROLS

4-1136” & 40” Toro GrandStand Service Manual

A. .05”to.09”(1.27to2.29mm)

13. Securethepositionoftheswitchbytighteningthe

twomountingscrews(Fig.220).

15. Positiontheneutralswitchboltsothegapbetween

it and the switch is between .05” and .09” (1.27 and

2.29mm).Securethepositionusingthejamnut(Fig.

222).

Fig. 220 DSCN-3666a

14. Secure the control cable to the motion control lever

usingashoulderboltandangenut(Fig.221).

Fig. 221 DSCN-3610a

Fig. 222 DSCN-3668a