Service Manual
ELECTRICAL
8-2536â & 40â Toro GrandStand Service Manual
8
11. Secure the wire harness to the PTO stop bracket
using a cable tie (Fig. 795).
Fig. 795 DSCN-2658a
13. Install the extension spring from the idler bracket to
the spring anchor (Fig. 797).
Fig. 797 DSCN-2660a
14. 36â Deck: Route the deck belt around the deck
spindle pulleys. Refer to decal 119-0186 (Fig. 798).
Fig. 798 decal 119-0186
12. Position the pump drive belt around the engine drive
pulley, the two hydraulic pump pulleys, and the idler
pulley (Fig. 796).
A. Hydraulic pumps D. Clutch retainer
B. Idler pulley E. Pump drive belt
C. Clutch pulley F. Pump drive pulley
Fig. 796 îżg. 67 G012686
A
B
C
D
E
F