Service Manual

ELECTRICAL
8-2336” & 40” Toro GrandStand Service Manual
8
5. Remove the rope from the engine cylinder and
replace the spark plug (Fig. 788).
Fig. 788 IMG-9634a
6. Position the engine onto the engine base (Fig. 789).
Fig. 789 DSCN-2587a
7. Secure the engine to the engine base using the four
sets of bolts and Belleville washers. Torque the bolts
to 30 - 35 ft-lbs. (41 - 47 Nm) (Fig. 790).
Note: The crown of the washer must face the bolt
head.
Fig. 790 DSCN-2581a