Service Manual

CHASSIS

3-536” & 40” Toro GrandStand Service Manual

3. Install grease seal into the wheel hub (Fig. 016). 6. Position the caster axle through the bearing and seal

assembly (Fig. 018).

Fig. 016 DSCN-0393a

4. Repeat steps 1, 2, and 3 on the other side of the

caster wheel.

5. Fill the center of the wheel hub with high-temp

grease (Fig. 017).

Fig. 017 DSCN-0406a

Fig. 018 DSCN-0398a

7. Install a spacer nut onto both ends of the caster axle

(Fig. 019).

Note: There should be approximately 3 internal

spacer nut threads visible on both sides,

indicating the axle is centered.

Fig. 019 DSCN-0379a