Service Manual
HYDRAULIC DRIVE SYSTEM
6-8 36” & 40” Toro GrandStand Service Manual
6
8. Removethebeltfromaroundthepumppulley(Fig.
447).
9. Remove the two set screws securing the pump
pulley to the pulley shaft, then remove the pulley
(Fig.448).
10. Remove the key from the pulley shaft keyway (Fig.
449).
Fig. 447 DSCN-2962a
Fig. 448 DSCN-2965a
Fig. 449 DSCN-2971a
11. Remove the bolt and nut securing the control cable
to the pump control arm (Fig. 450).
Fig. 450 DSCN-2978a