Operator's Manual

ControlsSystem
Maintenance
Adjustingthe
Motion-ControlLevers
Ifthemotion-controlleversdonotalignhorizontally,
adjusttherightsidemotion-controllever.
1.DisengagethePTO,movethemotion-control
leverstotheneutralposition,andengagethe
parkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Pushthemotion-controlleversdownoutofthe
NEUTRAL-LOCKposition(Figure69).
4.Checkiftherightmotion-controlleveraligns
horizontallywiththeleftmotion-controllever
(Figure69).
g009436
Figure69
1.Leftmotion-controllever3.Checkthehorizontal
alignmenthere
2.Rightmotion-controllever
intheNeutral-lockposition
4.Rightmotion-controllever
5.Toadjustthemotion-controllevershorizontally,
youmustadjustthecam.
6.Releasethecushionfromtherearofthe
machine.
7.Loosenthenutholdingthecam(Figure70).
g031538
Figure70
1.Cam
2.Nut
8.Adjustthecamuntilitalignswiththeleft
motion-controlleverandtightenthenutforthe
cam.
Note:Movingthecamclockwise(inthevertical
position)lowersthehandle;movingthecam
counterclockwise(intheverticalposition)raises
thehandle.
Important:Ensurethattheatportionofthe
camdoesnotgoaboveaverticalposition
(rightorleft);otherwiseyoumaydamagethe
switch.
9.Repeatsteps3through8fortheleft
motion-controllever.
50