Operator's Manual

ServicingtheFuses
Theelectricalsystemisprotectedbyfusesand
requiresnomaintenance.Ifafuseblows,checkthe
componentorcircuitforamalfunctionorshort.
1.Releasethecushionfromtherearofthe
machine.
2.Pulloutthefusetoremoveorreplaceit(Figure
51).
3.Installthecushiontotherearofthemachine.
Note:Ensurethatthecorrect-sizefuseis
installedFigure51.
g031414
Figure51
1.Ignitionfuse—15A3.Powertakeoff(PTO)
fuse—10A
2.Accessory-portfuse—15
A
4.Infocenterfuse—7.5A
DriveSystem
Maintenance
AdjustingtheTracking
Ifyoupushbothmotion-controlleversforwardthe
samedistanceandthemachinepullsto1side,adjust
thetrackingasfollows.
1.Parkthemachineonalevelsurface,disengage
thePTO,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Releasethecushionfromtherearofthe
machine;refertoReleasingtheCushionfor
RearAccess(page25).
Note:Foreasieraccess,youcanalsoremove
thefueltank;refertoRemovingtheFuelT ank
(page33).
4.Rotatetheleftcontrolrodinquarter-turn
incrementsuntilthemachinetracksstraight
(Figure52).
Note:Ifthemachinepullstotheright,shorten
thecontrolrodbyrotatingittotheright.Ifthe
machinepullstotheleft,lengthentherodby
rotatingittotheleft.
Note:Adjustonlytheleftcontrolrodtomatch
theleftwheelspeedtotherightwheelspeed.
Donotadjusttherightwheelspeed,asthis
positionstherightmotion-controlleveroutofthe
centerforthecontrolpanelneutral-lockslot.
Important:Donotrotatethecontrolrodtoo
far,asthismaycausethemachinetocreep
inneutral.
g031531
Figure52
1.Rotatelefttolengthenthe
rod.
3.Rotaterighttoshortenthe
rod.
2.Leftcontrolrod
5.Checkforpropertracking,andadjusttherod
asnecessary.
36