Manualshelf

Service Manual

ManualsBrandsToro ManualsRiding EquipmentToro 74471
919293949596979899100
5-24
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
CHASSIS
Throttle Cable Assembly
Installation
1. Route the throttle cable through the right console between the ROPS and the hydraulic uid reservoir (Figure
26).
2. Attach the throttle cable assembly to the control panel assembly using two bolts and nuts.
3. Install the knob on the throttle lever.
4. Install the control panel assembly into the console.
5. Move the throttle control lever to the slow idle position (Figure 27).
6. Place the z-bend of the throttle cable in the throttle plate on the engine in the position previously noted.
7. Place the cable under the cable clamp.
8. Ensure that the throttle control lever is in the slow idle position and tighten the cable clamp.
9. Connect the battery terminals and verify proper function of the unit.
Figure 26
Figure 27