Service Manual

3-48
Digital Edition - TITAN® HD Service Manual
January 2018
Table of Contents
MAINTENANCE
Changing the Blades (Rear Discharge Mower Deck) (Cont.)
Removal (Cont.)
NOTE: Note the type blade and where each blade is installed. See Figure 37 for the correct position.
Installation
NOTE: The right blade on this mower deck is counter-rotating and uses a left hand threaded blade bolt.
Use Figure 37 for the correct placement of the mower blades.
1. Install the left and center blades, curved washers, and blade bolts onto the spindle shaft (Figure 37).
NOTE: The curved part of the blade must point upward.
NOTE: Install the curved washer cone toward the bolt head.
A
B
CDE
Figure 37
A. Front of Mower Deck
B. Right - Hand Threaded Blade Bolts
C. Standard Blades
D. Counter - Rotating Blade
E. Left - Hand Threaded Blade Bolt