Operator's Manual

g036752
Figure89
1.Cotterpin3.Brakelinkageshaft
2.Parkingbrake
7.CheckbothspringlengthsasshowninFigure
90.Ifanadjustmentisnecessary,turnthe
topnutclockwisetoshortenthespringand
counterclockwisetolengthenit.
g036100
Figure90
1.Topnut
3.44mm(1-3/4inches)
2.Spring
8.Pushtheparkingbrakeleverallthewayforward
anddown.
9.Rotatethebrake-linkageshaftuntiltheend
alignswiththeholeinthelever.
•Shortenthelinkagebyturningitclockwise.
•Lengthenthelinkagebyturningit
counterclockwise.
10.Insertthebrake-linkageshaftintothe
parking-brakeholeandsecurewiththecotter
pin.Repeatstep5andadjustifnecessary.
11.Whenadjustmentiscomplete,removethejack
standsorequivalentsupportandlowerthe
machine.
12.PlacethemachineintotheOPERATINGposition.
RefertoUsingtheDrive-WheelReleaseValves
(page34).
64