Service Manual

5-18 Z Master Z400 Service Manual

ENGINE

1. Lower the engine onto the frame. Install 4 bolts and

spring washers through the frame and into the base

of the engine. Tighten the bolts (Fig. 000). 0287 left

Note: The 3 ground wires attach to the left rear

engine mounting bolt.

2. Apply anti-seize compound to the engine shaft (Fig.

272).

Fig 272 PICT-0025c

3. Apply a thread-locking compound to the clutch

retainer bolt (Fig. 273).

Fig 273 PICT-0026c

Fig 275 PICT-0017c

5. Install the drive belt onto the engine pulley (Fig.

275).

Fig 274 PICT-0018c

4. Install the engine pulley (Fig. 274).

Kohler V-Twin 20 hp Engine Install