Operator's Manual
Table Of Contents
- NO TITLE
- NO TITLE
- NO TITLE
- Before Operation Safety
- Recommended Fuel
- Using Stabilizer/Conditioner
- Filling the Fuel Tank
- Checking the Engine-Oil Level
- Breaking in a New Machine
- Using the Rollover-Protection System (ROPS)
- Think Safety First
- Using the Safety-Interlock System
- Positioning the Seat
- Changing the Seat Suspension
- Using Attachments and Accessories
- NO TITLE
- During Operation Safety
- Operating the Parking Brake
- Operating the Mower Blade-Control Switch (PTO)
- Operating the Throttle
- Operating the Choke
- Operating the Ignition Switch
- Starting and Shutting Off the Engine
- Using the Motion-Control Levers
- Driving the Machine
- Adjusting the Height-of-Cut
- Adjusting the Anti-Scalp Rollers
- Stopping the Machine
- Using the Side Discharge
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
5.Changetheengine-oillter(Figure47).
g027477
Figure47
Note:Ensurethattheoil-ltergaskettouches
theengineandthenturnthelteranextra3/4
turn.
6.Slowlypourapproximately80%ofthespecied
oilintothellertubeandslowlyaddthe
additionaloiltobringittotheFullmark(Figure
48).
g027484
Figure48
ServicingtheSparkPlug
ServiceInterval:Every100hours/Yearly
(whichevercomesrst)—For
Toroengines—checkthespark
plug(s).
Every200hours/Every2years(whichever
comesrst)—ForT oroengines—replacethe
sparkplug(s).
Makesurethattheairgapbetweenthecenterand
sideelectrodesiscorrectbeforeinstallingthespark
plug.Useaspark-plugwrenchtoremoveandinstall
thesparkplug(s)andagappingtool/feelergaugeto
checkandadjusttheairgap.Installanewspark
plug(s)ifnecessary.
Type:ChampionRN9YCorNGKBPR6ES
Airgap:0.76mm(0.03inch)
39