Setup Instructions

2.Installthelanyardclipsontothelongbolts(1/2x
3-1/4inch).
Note:Makesurethebenttabpointstowardthe
headofthebolt.
Figure7
3.Lightlyoiltheendsofthecenterrollbarsection.
4.Looselyinstallthecenterrollbarsectionusing2
bolts(1/2x3-1/4inch)and2angenuts(1/2inch).
Note:Makesuretheboltsareinstalledfromthe
outsideoftherollbar.
Note:Makesurethelanyardtabisinstalledasshow
andpointsforward.
Figure8
5.Raisetherollbarintotheuprightpositionandsecure
itwiththepinsandhairpincotterpinsfastenedto
thelanyards
Figure9
6.Torquealllowerfasteners,attachedtothemachine
frame,to30ft-lb.
7.Tightenthecenterrollbarbolts(1/2x3-1/4inch)
soitrotatesfreelywithsomeresistance.
Note:Nomorethanonethreadshouldbeexposed
outsidethenut.
Figure10
8.Tightenthefrontknobsagainstthecenterrollbar
ends.
4