Service Manual

5-26 Z Master Z400 Service Manual
5
ENGINE
11. Remove the red wires located on the starter solenoid
(Fig. 303).
Fig 303 PICT-0331
12. Remove the blue wire located on the starter solenoid
(Fig. 304).
Fig 304 PICT-0332
Fig 306 PICT-0100a
15. Unplug the clutch pigtail harness from the main
harness (Fig. 306).
Fig 305 PICT-0099a
13. Remove the mower drive belt from the electric PTO
clutch. Refer to Replacing the Mower Deck Drive
Belt page x-xx.
14. Remove the plastic tie holding the clutch harness to
frame (Fig. 305).