Service Manual

A2-2 TimeCutter Z / Precision Z Service Manual
SPECIFICATIONS
Item Specifi cation
Engines All units were manufactured with Briggs & Stratton engines ranging from 14 to 17
horsepower. For information on servicing the engine, contact Briggs & Stratton
Corporation.
RPM setting,
all models
High RPM Setting (no load) 3300 + 100 RPM
Construction Frame: 10 gauge steel
Fuel Capacity 2 gallons (7.5 liters) Diesel Fuel
Wheel Base 47.6” (120.9cm) center of front to center of drive tires
Overall Length 72.6” (184.4cm)
Overall Width Model Width
14-38Z & Z380 45.4” (115.3cm) with deck defl ector down, 42.4” (107.7cm) Gate
width with defl ector up.
16-42Z, 17-42Z &
Z420
50.7” (128cm) with deck defl ector down, 45.0” (116.8cm) Gate
width with defl ector up.
18-44Z 60” (152.4cm) with deck defl ector down, 46.6” (118.4cm) Gate
width with deck defl ector up.
Z480 62.5” (158.8cm) with deck defl ector down, 53.5” (135.9cm) Gate
width with deck defl ector up.
Weight Model Net Weight Model Net Weight
14-38Z & Z380 505 lbs. (229kg) est. 18-44Z 535 lbs. (243kg) est.
16-42Z & Z420 516 lbs. (234kg) est. Z480 550 lbs. (249kg) est.
17-42Z 516 lbs. (234kg) est.
Traction System Transaxles: Twin Hydro-Gear EZT
Transaxle Drive: Belt Drive with self-tensioning system.
Ground Speed Forward: Infi nite 0 – 6.0 mph (9.6km/hr)
Reverse: Infi nite 0 – 3 mph (5km/hr)
Tires Front Tires all models - 410/350 x 4-4.25
Rear Tires 18 x 6.5 - 8, 14-38Z/Z380
Rear Tires 18 x 7.5 - 8, 16-42Z/Z420
Rear Tires 18 x 8.5 - 8, 17-42Z/18-44Z/Z480
Tire Pressure Front Tires 35 psi (241kPa)
Rear Tires 13 psi (90kPa)
Attachment Drive Electric Clutch, Maintenance Free, No Adjustments
2
General Specifi cations - Toro TimeCutter
®
Z