Service Manual

3-32 Z Master Z400 Service Manual

CHASSIS

3. Remove the cotter pin and clevis pin securing the

adjustable yoke of the neutral return bolt (Fig. 142).

Fig 142 PICT-0073

4. Disconnect the motion control dampener from the

motion control assembly (Fig. 143).

Fig 143 PICT-0074

Fig 144 PICT-0076

5. Remove the bolt and nut that retaining the ball joint

to the motion control shaft (Fig. 144).

Fig 141 PICT-0072

2. Remove the two bolts and washers retaining the

lever assembly to the control arm shaft (Fig. 141).