Service Manual

7-22 Z Master Z400 Service Manual
7
MOWER DECKS/PTO
5. Install the bearing spacer into the spindle housing
opening (Fig. 482).
Fig 482 PICT-0176 rev
6. Install the upper ball bearing with the open end of
the bearing to the inside of the housing (Fig. 483).
Fig 483 PICT-0180
Fig 485 PICT-0183 rev
8. Install the pulley hub onto the spindle shaft.
Note: The raised center of the hub faces away from
the spindle (Fig. 485).
Fig 484 PICT-0181 rev
7. Install the upper thrust washer and bearing shield
onto the spindle shaft (Fig. 484).