Operator's Manual

47
Replacing the Grass Deflector
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator’s or
bystander’s direction and result in serious injury.
Also, contact with the blade could occur.
• Never operate the lawn mower unless you install
a cover plate, a mulch plate, or a grass chute
and catcher.
• Ensure that the grass deflector is in the down
position.
Warning
1. Remove the locknut, bolt, spring, and spacer that hold
the deflector to the pivot brackets (Fig. 64).
m–7708
1
2
3
4
5
7
6
8
m–5037
Figure 64
1. Bolt
2. Spacer
3. Locknut
4. Spring
5. Spring installed
6. Grass deflector
7. Place behind mower
housing edge before
installing bolt
8. Hook end of spring
2. Remove the damaged or worn grass deflector.
3. Place the spacer and spring onto the grass deflector.
4. Install the bolt and nut.
5. Place the hook end of the spring around the grass
deflector (Fig. 64).
Important The grass deflector must be able to lower
down into position. Lift the deflector up to ensure that it
lowers into the full down position.
Waste Disposal
Engine oil, hydraulic oil, engine coolant, and the battery are
pollutants to the environment. Dispose of these according
to your local regulations.