Service Manual

3-33Z Master Z400 Service Manual

Fig 145 PICT-0078

6. Disconnect neutral switch wire harness from the

neutral switch (Fig. 145).

CHASSIS

7. Remove the two bolts and nuts that retain ange

bearing on the inside of the motion control (Fig.

146).

Fig 146 PICT-0079

8. Remove the two bolts and nuts that retain the ange

bearing on the outside of the motion control (Fig.

147).

Fig 147 PICT-0080

Motion Control Assembly Installation

Reverse the order of removal.

Fig 148 PICT-0081

9. Remove the motion control assembly from the frame

(Fig. 148).