Service Manual

7-13Z Master Z400 Service Manual

2. Slide the deck under the frame.

3. Place 4 x 4 wood blocks under the edge of the

mower deck (Fig. 450).

Fig 450 PICT-0394

4. Install the right and left strut pins (Fig. 451).

Note: The gauge wheels may need to be loosened

or removed to install the strut pin.

Fig 451 PICT-0380

Fig 453 PICT-0396

6. If needed tighten the anti-scalp roller bolts.

7. Set the lift handle at the 3” (7.6cm) height-of-cut

position. Pin in place (Fig. 453).

Fig 452 PICT-0379

5. Install the nut and bolt that holds the strut pin to the

deck (Fig. 452).

MOWER DECKS/PTO