Service Manual

4-7Z Master Z400 Service Manual

Fig 169 PICT-0092a

14. Install the seat retainer rod (Fig. 169).

Fig 168 PICT-0087a

13. Install the cog belt onto the drive pulley. With a

spring puller, install the extension spring to the idler

arm assembly (Fig. 168).

HYDRAULIC SYSTEM

Replacing the Pump Drive Belt

15. Connect the negative battery cable to the battery.

16. Check the hydraulic uid in the reservoir tank. Add

oil if necessary. Air will need to be purged from

system. Follow the procedures for Purging the

Hydraulic System, page x-xx.

17. Check the neutral adjustment. Follow procedures for

Adjusting the Handle Neutral, page x-xx.

1. With a spring puller, remove the extension spring

from the idler arm assembly and remove the cog belt

from the pump drive and idler pulleys (Fig. 170).

Fig 170 PICT-0097a