Service Manual

3-23Z Master Z400 Service Manual

Fig 108 DSC-1629 rev

1. Install the brake band around the wheel hub (Fig.

108).

Fig 107 DSC-1626 rev

3. Remove bolts, brake band retainer, spacers, and

brake band (Fig. 107).

CHASSIS

2. Install the 3 bolts, brake band retainer, brake band,

and spacers and tighten (Fig. 109).

Fig 109 DSC-1631 rev

1. Raise the rear end of the machine and remove both

right and left wheels.

Note: To prevent the unit from rolling, block the two

front tires.

Brake Band Installation

3. Install wheel assembly and 4 wheel lug nuts.

Brake Shaft Removal (Pro Series)

A. 3 Bolts C. 3 Spacers

B. Brake Band Retainer D. Brake Band