Service Manual

5-24 Z Master Z400 Service Manual

ENGINE

Kohler 18 hp Single Cylinder Removal

1. Remove the battery negative cable from the battery.

2. Raise the rear wheels of the machine off the ground

and support the frame with jack stands. Remove

both rear wheels.

3. Remove the 6 bolts, washers and nuts holding the

rear bumper to the frame (Fig. 295). Remove the

rear bumper.

Fig 295 PICT-0321

4. Loosen the rear cable clamp and disconnect the

choke cable (Fig. 296).

Fig 296 PICT-0323

Fig 298 PICT-0325

6. Remove the green oil sending wire from the oil

pressure switch (Fig. 298).

Fig 297 PICT-0324

5. Remove the front cable clamp and disconnect the

throttle cable (Fig. 297).