Service Manual
CHASSIS
3-44 TimeCutter® Z/Precision® Z Service Manual
3
13. Install the washer and cotter pin on the lift lever
assembly (Fig. 174).
14. On the left and right side, install the brake cable
through the hole located in the seat/pods bracket
DQGSXVKXQWLOWKHEUDNHFDEOHFRQGXLW¿WWLQJORFNV
into the hole (Fig. 175).
Fig. 174 PICT-9392
Fig. 175 PICT-9449
12. Install the 4 bolts and washers that retain the seat/
pods bracket to the frame (Fig. 173).
11. Install the right and left neutral wiring harnesses
through the hole on the back side of the seat/pods
bracket (Fig. 172).
Fig. 172 PICT-9465a
Fig. 173 PICT-9400