Service Manual

CHASSIS
3-35TimeCutter® Z/Precision® Z Service Manual
3
4. Remove the left hand pod from the unit. (Fig. 136). 6. Remove the fuel cap and the rubber washer.
7. Remove the 3 shoulder screws retaining the right
hand pod to the frame (Fig. 138).
Fig. 136 PICT-9260
5. Remove the four screws on the control panel and
move the control panel away from the pod (Fig.
137).
Fig. 137 PICT-9225
Fig. 138 IMG-0455a
8. Remove the right hand pod from the frame (Fig.
139).
Fig. 139 PICT-9232