Service Manual

ABOUT THIS MANUAL

This service manual was written expressly for Toro service technicians. The Toro Company has made every effort to

make the information in this manual complete and correct.

Basic shop safety knowledge and mechanical/electrical skills are assumed. The Table of Contents lists the systems

and the related topics covered in this manual.

For service information on drive systems, please refer to the Hydro-Gear ZT-2800/ZT-3100/ZT-3400 service manual

(BLN 52441) and the Hydro-Gear ZT-2100/ZT2200 EZT service manual (492-4778). For information specic to the

engines used on this unit, refer to the appropriate engine manufacturer’s service and repair instructions.

Toro TimeCutter® SS, Toro TimeCutter® MX and Toro TimeCutter® ZS model years 2011 – 2013 are covered in this

manual. The manual may also be specied for use on later model products.

The hydrostatic transaxle is a sophisticated piece of machinery. Maintain strict cleanliness control during all stages of

service and repair. Cover or cap all hose ends and ttings whenever they are exposed. Even a small amount of dirt or

other contamination can severely damage the system.

If you have any questions or comments regarding this manual, please contact us at the following address:

The Toro Company

Residential and Landscape Contractor Service Training Department

8111 Lyndale Avenue South

Bloomington, MN 55420

The Toro Company reserves the right to change product specications or this manual without notice.