Service Manual

SAFETY INFORMATION
1-1
Toro TimeCutter SS/MX/ZS Service Manual
1
This symbol means WARNING or PER -
SONAL SAFETY INSTRUCTION – read
the instruction because it has to do with
your safety. Failure to comply with the
instruction may result in personal injury
or even death.
This manual is intended as a service and repair manual
only. The safety instructions provided herein are for
troubleshooting, service, and repair of the TimeCutter®
SS, the TimeCutter® MX and the TimeCutter® ZS zero
radius turn mowers.
General Information
Think Safety First
Avoid unexpected starting of engine…
Always turn off the engine and disconnect the spark plug
wire(s) before cleaning, adjusting, or repair.
Avoid lacerations and amputations…
Stay clear of all moving parts whenever the engine is
running. Treat all normally moving parts as if they were
moving whenever the engine is running or has the
potential to start.
Avoid burns…
Do not touch the engine, mufer, or other components,
which may increase in temperature during operation,
while the unit is running or shortly after it has been
running.
Avoid res and explosions…
Avoid spilling fuel and never smoke while working with
any type of fuel or lubricant. Wipe up any spilled fuel
or oil immediately. Never remove the fuel cap or add
fuel when the engine is running. Always use approved,
labeled containers for storing or transporting fuel and
lubricants.
Avoid asphyxiation…
Never operate an engine in a conned area without
proper ventilation.
Avoid injury from batteries…
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes and clothing. Battery gases can
explode. Keep cigarettes, sparks and ames away from
the battery.
Avoid injury due to inferior parts…
Use only original equipment parts to ensure that
important safety criteria are met.
Avoid injury to bystanders…
Always clear the area of bystanders before starting or
testing powered equipment.
Avoid injury due to projectiles…
Always clear the area of sticks, rocks or any other debris
that could be picked up and thrown by the powered
equipment.
Avoid modications…
Never alter or modify any part unless it is a factory
approved procedure.
Avoid unsafe operation…
Always test the safety interlock system after making
adjustments or repairs on the machine. Refer to the
Electrical section in this manual for more information.
The TimeCutter SS, TimeCutter MX and TimeCutter ZS
operator’s manuals contain safety information and
operating tips for safe operating practices. Operator’s
manuals are available online through your Toro parts
source or:
The Toro Company
Publications Department
8111 Lyndale Avenue South
Bloomington, MN 55420
!