Service Manual

ENGINE

4-5TimeCutter® Z/Precision® Z Service Manual

Engine Installation

2. Make sure when lowering the engine that the engine

oil drain tube is routed through the hole in the frame

(Fig. 237).

4. Install the positive starter cable to the bottom of the

engine starter (Fig. 239).

1. Install the engine into the frame (Fig. 236).

3. Install the negative battery cable and the negative

wire to the wiring harness to the top of the starter

terminal (Fig. 238).

Fig. 236 PICT-9529

Fig. 237 PICT-9530

Fig. 238 PICT-9525

Fig. 239 PICT-9523