Service Manual
CHASSIS
3-55TimeCutter® Z/Precision® Z Service Manual
3
Rear Bumper Installation
Fig. 218 PICT-9492
1. Install the rear bumper to the frame (Fig. 218).
5HDU%XPSHU5HSODFHPHQW
Rear Bumper Removal
1. Remove the 4 bolts, washers and nuts (Fig. 216).
Fig. 216 PICT-9484
2. Remove rear bumper from the frame (Fig. 217).
Fig. 217 PICT-9492
Fig. 219 PICT-9484
2. Install washers under each bolt head. On the two
outside bolts, install a large hardened washer be-
tween the bolt and the nut; the other two bolts use
regular washers. Tighten all 4 bolts, washers and
nuts (Fig. 219).