Service Manual

CHASSIS
3-39TimeCutter® Z/Precision® Z Service Manual
3
22. Pull the neutral wiring harness out of the hole
located on the backside of the seat/pods bracket.
There is one on the left side and one on the right
side (Fig. 152).
24. Remove the screw from the relay base and remove
the base from the seats/pods bracket (Fig. 154).
Fig. 152 PICT-9465a
23. Unplug the relay from the harness (Fig. 153).
Fig. 153 PICT-9413
Fig. 154 PICT-9417
25. Remove the two screws retaining the fuse block to
the seats/pods bracket (Fig. 155).
Fig. 155 PICT-9419