Service Manual

CHASSIS

3-25TimeCutter® Z/Precision® Z Service Manual

Seat Pivot/Control Assembly Installation

2. Install a washer and a nut onto the shoulder bolt and

tighten (Fig. 099).

Note: Perform the same installation on the RH and

LH side.

1. Install the activator and actuator arm assembly into

the seat pivot/control assembly using a shoulder bolt

(Fig. 098).

Fig. 098 PICT-9318

Fig. 099 PICT-9320

35. Remove the activator arm and actuator from the seat

pivot/control assembly (Fig. 097).

Fig. 097 PICT-9317