Service Manual

ENGINE

4-8 TimeCutter® Z/Precision® Z Service Manual

11. Apply anti-seize lubricant to the engine crankshaft

(Fig. 248).

14. Apply medium strength thread-locking material to the

threads of the clutch bolt before installing (Fig. 251).

13. Install the drive belt around the engine drive pulley

by releasing the spring tension on the idler arm.

Make sure the belt is routed around both transmis-

VLRQSXOOH\VDURXQGWKHWZRÀDWLGOHUSXOOH\VDQG

then around the engine drive pulley (Fig. 250).

Fig. 248 PICT-9538

12. Install the engine drive pulley. Make sure side of the

pulley stamped “clutch side” is facing down toward

the electric PTO clutch (Fig. 249).

Fig. 249 PICT-9509

Fig. 250 PICT-9506

Fig. 251 PICT-9544a